*TRAILER w/ RENTAL – $50.00

This SC70TX stump grinder is our largest stump grinder we provide at Ralphs we recommend this machine for just about any size stumps. This grinder is featured with a key start, it has extendable and retractable tracks also has side wings that can be removed to get into any narrow places such as fences or in-between other trees. It has a swinging door to be able to watch what you’re cutting. It also features many rubber guards to stop debris from flying at the operator. If you think this machine is too big for your job we also provide a smaller unit that operates almost exactly the same way called the Sc362.



Vermeer SC70TX


Length: 141.6 in(359.7 cm)
Track Width (Extended): 51″
Track Length on Ground: 51.2″
Cutterwheel Thickness: 1.1 in(2.8 cm)
Width: 51 in(129.5 cm)
Cutterwheel Diameter without Teeth: 23 in(58.4 cm)
Height: 72 in(182.9 cm)
Track Width (Retracted): 35″
Cutterwheel Straight Line Dimension:  65 in(165.1 cm)


Fuel Type: Ultra-low sulfur diesel
Upper Gearbox: Straight bevel
Air Cleaner: Dry-type, restriction indicator, evacuator valve and safety element
Recommended Oil: 10W-30
Oil Type: SAE 75W90 synthetic gear oil
Torque (Max.): 153 ft-lb. (207.4 Nm)
Lower Gearbox: Straight bevel
Max Fuel Consumption: 3.6 gph (13.6 lph)
Gross Horsepower (Maximum): 67 hp. (50 kw)
Oil Capacity (Lower Gearbox):  2.2 qt. (2.1 L)
Oil Volume with Filter: 8.5 qt. (8 L)
Recommended Oil Type: Vermeer Highpower 68
Oil Type (Lower Gearbox): SAE 75W90 synthetic gear oil
Clutch Type: Electric clutch with brake
Oil Filter: Spin-on
Make and Model: CAT C2.2 Turbocharged Tier 4 Final Diesel


System Voltage: 12
Weight (Engine Option One): 3900 lbs. (1769 kg)
Control Station Description: Swing out
Ground Bearing Pressure (Soft Ground): 4.3 psi (29.6 kPa)
Cutterwheel Speed: 880 rpm
Cutterwheel Cut Below Ground: 16 in. (40.6 cm)
System Type: Tandem gear pump, pressure balanced
System Relief Pressure: 2900 psi (200 Bar)
Battery: 575
Brake Type: Spring-applied and hydralically released dual parking brakes
Track Frame Description: Tube and plate
Driveshaft: 2 universal joints
Track Type: 9″ rubber iron core
Alternator: 85A
Coolant Capacity (Engine and Radiator): 2.9 gal. (11 L)
Cooling Medium: Water/Antifreeze
High Speed Travel: 1.6 mph (2.6 km/h)
Number of Teeth: 30
Low Speed Travel: .7 mph (1.1 km/h)
Fuel Tank Capacity: 12 gal. (45.4 L)
Cutterwheel Cut Above Ground: 27 in. (68.6 cm)
Fan: 16.5″
Hydraulic System (Pump Flow at Maximum RPM): 9 gpm (34.1 L/min)
Maximum Angle of Continuous Operation: deg.
Number of Idlers: 10
Tank Capacity: 9.6 gal. (36.3 L)
Reversible Pockets: 30
Tooth Description: Yellow Jacket Cutter System
Sensor Type: Capacitive
Operator Vision Shield Description: Abrasion-resistant coated polycarbonate
Chip Containment: 23 cu ft. (.7 cu/m)
Number of Pockets: 30
Display: MFD (Multifunction display). Displays – hours, fuel level, engine speed, engine faults and engine status
Hydraulic System (System relief pressure): 2900 psi (199.9 bar)
Driveshaft (U Joints): Two standard with double lip seal
Switches: Boom swing, boom height, creep propel, ignition, clutch, track gage, track speed range, smartsweep and throttle
Oil Capacity: 1.7 qt. (1.6 L)
Warning Lights: Engine warning
Track Drive Motor Type: Integral motor and planetary unit
Track Drive Pump Type: Tandem gear pump, pressure balanced
Track Brake Type: Integrated into motor/planetary unit
Shutdown System: High engine temperature and low oil pressure
Controller: Vermeer C248 with SmartSweep
Pump Flow at Maximum RPM: 9 gpm
Number of Indexes: 2
Quantity/Location: 2
Filtration Method: Full-flow 4 micron return filter, suction strainer


Additional information


4-HR, Daily

You may also like…

Designed by: X-Tek Web Solutions