Description
Vermeer SC70TX
| Dimensions: | |
|---|---|
| Length: | 141.6 in(359.7 cm) |
| Track Width (Extended): | 51″ |
| Track Length on Ground: | 51.2″ |
| Cutterwheel Thickness: | 1.1 in(2.8 cm) |
| Width: | 51 in(129.5 cm) |
| Cutterwheel Diameter without Teeth: | 23 in(58.4 cm) |
| Height: | 72 in(182.9 cm) |
| Track Width (Retracted): | 35″ |
| Cutterwheel Straight Line Dimension: | 65 in(165.1 cm) |
| Engine: | |
|---|---|
| Fuel Type: | Ultra-low sulfur diesel |
| Upper Gearbox: | Straight bevel |
| Air Cleaner: | Dry-type, restriction indicator, evacuator valve and safety element |
| Recommended Oil: | 10W-30 |
| Oil Type: | SAE 75W90 synthetic gear oil |
| Torque (Max.): | 153 ft-lb. (207.4 Nm) |
| Lower Gearbox: | Straight bevel |
| Max Fuel Consumption: | 3.6 gph (13.6 lph) |
| Gross Horsepower (Maximum): | 67 hp. (50 kw) |
| Oil Capacity (Lower Gearbox): | 2.2 qt. (2.1 L) |
| Oil Volume with Filter: | 8.5 qt. (8 L) |
| Recommended Oil Type: | Vermeer Highpower 68 |
| Oil Type (Lower Gearbox): | SAE 75W90 synthetic gear oil |
| Clutch Type: | Electric clutch with brake |
| Oil Filter: | Spin-on |
| Make and Model: | CAT C2.2 Turbocharged Tier 4 Final Diesel |
| Operational: | |
|---|---|
| System Voltage: | 12 |
| Weight (Engine Option One): | 3900 lbs. (1769 kg) |
| Control Station Description: | Swing out |
| Ground Bearing Pressure (Soft Ground): | 4.3 psi (29.6 kPa) |
| Cutterwheel Speed: | 880 rpm |
| Cutterwheel Cut Below Ground: | 16 in. (40.6 cm) |
| System Type: | Tandem gear pump, pressure balanced |
| System Relief Pressure: | 2900 psi (200 Bar) |
| Battery: | 575 |
| Brake Type: | Spring-applied and hydralically released dual parking brakes |
| Track Frame Description: | Tube and plate |
| Driveshaft: | 2 universal joints |
| Track Type: | 9″ rubber iron core |
| Alternator: | 85A |
| Coolant Capacity (Engine and Radiator): | 2.9 gal. (11 L) |
| Cooling Medium: | Water/Antifreeze |
| High Speed Travel: | 1.6 mph (2.6 km/h) |
| Number of Teeth: | 30 |
| Low Speed Travel: | .7 mph (1.1 km/h) |
| Fuel Tank Capacity: | 12 gal. (45.4 L) |
| Cutterwheel Cut Above Ground: | 27 in. (68.6 cm) |
| Fan: | 16.5″ |
| Hydraulic System (Pump Flow at Maximum RPM): | 9 gpm (34.1 L/min) |
| Maximum Angle of Continuous Operation: | deg. |
| Number of Idlers: | 10 |
| Tank Capacity: | 9.6 gal. (36.3 L) |
| Reversible Pockets: | 30 |
| Tooth Description: | Yellow Jacket Cutter System |
| Sensor Type: | Capacitive |
| Operator Vision Shield Description: | Abrasion-resistant coated polycarbonate |
| Chip Containment: | 23 cu ft. (.7 cu/m) |
| Number of Pockets: | 30 |
| Display: | MFD (Multifunction display). Displays – hours, fuel level, engine speed, engine faults and engine status |
| Hydraulic System (System relief pressure): | 2900 psi (199.9 bar) |
| Driveshaft (U Joints): | Two standard with double lip seal |
| Switches: | Boom swing, boom height, creep propel, ignition, clutch, track gage, track speed range, smartsweep and throttle |
| Oil Capacity: | 1.7 qt. (1.6 L) |
| Warning Lights: | Engine warning |
| Track Drive Motor Type: | Integral motor and planetary unit |
| Track Drive Pump Type: | Tandem gear pump, pressure balanced |
| Track Brake Type: | Integrated into motor/planetary unit |
| Shutdown System: | High engine temperature and low oil pressure |
| Controller: | Vermeer C248 with SmartSweep |
| Pump Flow at Maximum RPM: | 9 gpm |
| Number of Indexes: | 2 |
| Quantity/Location: | 2 |
| Filtration Method: | Full-flow 4 micron return filter, suction strainer |
